CF 100 Range

Vents CF 100 Series: High-performing centrifugal extractors


Small centrifugal fans for extracting air, available in one nominal size: Ø 100 mm


Create a healthier indoor environment with the CF 100 Turbo 100mm centrifugal extractor fan, engineered for dependable ventilation in bathrooms, toilets, shower rooms, kitchens and utility areas. With an airflow rate of up to 122 m³/h, this fan is designed to remove humidity, odours and stale air quickly—helping to reduce condensation and improve comfort. Thanks to its radial impeller with forward-curved blades, the CF 100 Turbo generates higher pressure than many standard axial fans, making it a strong choice for installations with longer duct runs, bends, or high-resistance ventilation shafts.


Options

CF Standard: on / off via light switch (on-site)


CF TP: adjustable timer 2 - 30 minutes, motion detector

CF T: adjustable timer 2 - 30 minutes


CF V: on / off via pull switch

CF TH: adjustable timer 2 - 30 minutes, adjustable humidity sensor 60 - 90% relative humidity


CF VTH: on / off via pull switch, adjustable timer 2 - 30 minutes, adjustable humidity sensor 60 - 90% relative humidity

The CF range is available in multiple versions to match different control preferences and building requirements. Choose the CF 100 T if you want an adjustable run-on timer (2 - 30 minutes) to keep extracting after the light is switched off. For fully automatic humidity control, the CF 100 TH adds a humidity sensor with an adjustable activation threshold (60 - 90% RH), ideal for showers and bathrooms where moisture spikes are common. Prefer simple manual control? Versions with a pull cord (V, VTH) let users switch the fan on and off directly at the unit, while the CF 100 VTH adds pull-cord convenience with a timer and humidity sensing. For hands-free operation in busy areas, the CF 100 TP integrates a motion sensor (1 - 4 m range, up to 100° detection angle) plus an adjustable run-on time - perfect for WCs, corridors, changing rooms and staff facilities.


Durability and easy maintenance are built in. The housing and impeller are made from tough, UV-resistant ABS plastic, designed to withstand everyday use. A practical front grille with an integrated filter element helps protect internal components from dust and grease, which also makes the fan suitable for kitchen extraction where airborne particles are more likely. A built-in automatic backdraft shutter helps prevent unwanted airflow and smells returning from the duct or shaft when the fan is off. Rated IP24, the unit is well suited to typical bathroom and sanitary environments.

At the heart of the CF 100 Turbo is a high-performance motor designed for long service life. The ball-bearing motor is mounted on dedicated anti-vibration dampers, helping to reduce vibration and support quiet, stable operation. The bearings are maintenance-free and lifetime-lubricated, with an intended service life of around 40,000 operating hours. An integrated overheat protection feature adds an extra layer of safety, while the multi-speed motor concept supports efficient ventilation across different usage scenarios.


Installation is flexible and installer-friendly: the fan supports surface or flush mounting, works in vertical or horizontal orientation, and can also be ceiling mounted. If the fan position is away from the ventilation shaft, flexible ducting can be connected to the outlet spigot using a hose clamp. In short, the CF 100 Turbo is a modern, high-pressure 100mm extractor fan solution for reliable ventilation—especially where duct resistance would challenge conventional fans.