AireRyder

Ceiling fan Cyrus White with pull chain

Ø 107cm / 42"

max. motor wattage: 50 W

housing colour: white

blade colour: white / pine

pull switch operation


Item number FN44477N

immediately ready for dispatch, delivery time 2 - 3 days


* Incl. VAT excl. Shipping

Dimensions and technical data

  • 220-240 V ~ 50 Hz
  • Diameter: 107cm / 42"
  • Housing colour: white
  • Blade colour: white / pine (reversible)
  • Blade pitch: 15°
  • Motor wattage: 15 / 30 / 50 W
  • Revolutions per minute: 100 / 140 / 200
  • Max. airflow: 100 m3/min / 3531 CFM
  • Ceiling to blades: 20.3cm / 7.99"
  • Overall drop: 29cm / 11.41"
  • Drop rod can be cut to size
  • Max. ceiling slope: 23°
  • Manual reversing switch for summer and winter mode (forward and reverse function)
  • Includes pull cord: 3 fan speeds / off
  • Weight: 4.3kg / 9.5lbs
  • Includes optional 3 x GU10 light kit (can be installed with or without lights)

The modern AireRyder Cyrus ceiling fan is supplied with reversible blades in white and pine. Apply the Cyrus to rooms with about 12 m² space. Its 107 cm diameter makes the fan perfect for medium-sized and small rooms. Three rotation speeds between 100 and 200 revolutions per minute are controlled with integrated pull cords. The spinning direction (forward / reverse) is determined by a little switch located on the motor housing. Select summer mode to provide a cool breeze on hot days. Flick the switch to winter mode and reduce your heating bill by up to 30%. During winter mode the fan spins in reverse and forces heat down from the ceiling to remove cold spots on the floor.

Our Cyrus model can be installed with and without a light kit. All required parts for either type of installation is included in the delivery. When fitted without lights, a cap is added to the bottom of the switch housing to hide wiring. Alternatively, there is a light kit with three adjustable spots. The fan and light functions are controlled with two independent pull cords. You can use any type of bulb you want as long as they have a GU10 base. You can also add a remote kit or wall controller if you wish. The suitable models are shown in our accessory section.

tab placehold





Accessories

Similar products