Vortice

Small room extractor fan range Vortice Punto M 150 IPX4

extractor fan range with various options

max. 30 W wattage

IPX4 splashing water protection

mount to walls in horizontal, vertical or diagonal position

thermal overload protection


Item number 11851

delivery time up to 10 days


* Incl. VAT excl. Shipping

Dimensions and technical details

  • 220-240 Volt ~ 50 Hertz
  • Axial extractor fan, various options available
  • Housing colour: white
  • Housing material: UV-resistant ABS plastic
  • Nominal size: 150 mm
  • Max. wattage: 30 W
  • Max. current consumption: 0.15 A
  • Revolutions per minute: 2100
  • Speed levels: 1
  • Total pressure Pmax: 59 Pa
  • Sound pressure level Lp-3m: 46 dB(A)
  • Max. temperature for continuous operation: 50°C
  • Protection code: IPX4
  • Protection class: II
  • Weight: 1.1kg
  • Thermal overload protection
  • Used to extract air from the inside directly to the outside or connect to ducts with up to 4m length
  • Mounting options: wall mounting (horizontal, vertical, diagonal position)
  • Optional window installation kit sold separately
  • Ideal for intermittent or permanent ventilation in bathrooms, kitchens, utility rooms, etc. in residential or commercial buildings
Model Equipment Max. airflow m³/h Engine support Speed control
Punto M 150 LL standard 335 ball bearing can be added
Punto M 150 A LL automated internal shutter flap 335 ball bearing cannot be added
Punto M 150 A PIR LL automated internal shutter flap, adjustable motion sensor (3-20 min after leaving the room) 335 ball bearing cannot be added
Punto M 150 AP automated internal shutter flap, pull switch 335 plain bearing cannot be added
Punto M 150 AT LL automated internal shutter flap, adjustable timer (3-20 min) 335 ball bearing cannot be added
Punto M 150 AT HCS LL automated internal shutter flap, adjustable timer (3-20 min), adjustable humidity sensor (60-90% RH) 335 ball bearing cannot be added
Punto M 150 P pull switch 335 plain bearing cannot be added
Punto M 150 T LL adjustable timer (3-20 min) 335 ball bearing can be added
Dimensions Vortice Punto M 150 series bathroom fan window fan
Model

A

B

C

D

E

M 150/6"

214 mm 215 mm 117 mm 47 mm 156 mm

 

Characteristics

Characterstics Vortice Punto M 150 series
Kennlinie_Punto_120Optional accessories are available in our shop.

The Punto M 150 bathroom fan can be applied in all places where humidity needs to be extracted from enclosed residential or commercial premises. Produced by well-known brand Vortice the Punto removes smells from kitchens, cellar rooms and sanitary facilities with intermittent or permanent ventilation. Time, effort and costs for installation of the Punto M 150 in windows are kept low, additional accessories will even allow you to mount this fan to porch walls or ceilings. The ball bearing, capsulated motor offers a maximum air flow of 335 m³/h which can handle ventilation shafts with up to four metres length - otherwise the fan wheel extracts used air directly to the outside, while operating with as little as 46 decibel.

Models without automated internal cover flaps can be controlled with speed controller units or step transformers, they will reach a maximum of 2100 rpm in environments with up to 50°C ambient temperature. The motor is equipped with a protection against thermal overload by default. Depending on your individual needs, Creoven offers this bathroom fan with pull switch and pull cord, 3 - 20 minute timer, passive infrared motion sensor or microprocessors for humidity control. The quality is quite impressive, too: The UV resistant ABS housing does not become yellow, it retains its hygienic, white colour.

tab placehold





Accessories